|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
USING THE BLOWER To blow away debris on the ground
Fitting the blower tube and nozzle on the blower
!
WARNING! When fitting the blower tube and nozzle, the engine must be switched off and the stop switch must be in the stop position. 15
The blower tube and nozzle have a bayonet mount. Fit them in the following manner: 1. Press the blower tube (15) against the blower air outlet and turn it 90 degrees until a snap is heard. 2. Fit the nozzle (14) onto the tube (15), and turn it 90 degrees until a snap is heard.
14
Blowing
Before you begin blowing, put on the required safety equipment. WARNING! When working with the blower, wear the required protecting equipment: 1. 2. 3. Hearing protection. Eye protection. Face mask in dusty environments.
!
When operating the blower, the blower must be secured to the shoulder strap. The strap should be worn over the shoulder as shown in the adjacent figure.
14 � English
|
|
|
> |
|
