|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
;
The manual was very helpfull, it answerdes all my questions, and i was surprized to find the original manual on this site! Big thumbs uP:)
 ;
helpful manual.good service.Quick response.will use again
;
Speedy confirmation to my order , with elaborate instructions .
Item Email , received immediately as desired by me.
A Pleasant & Satisfying Transaction.
ASSEMBLY
Correct height
1 Forestry clearing The machine should be supported in a harness when forestry clearing so that the cutting equipment is angled slightly forwards in relation to the ground. Adjust the height using the strap on the harness for the support hook. 3 Adjust the shoulder strap to distribute the load evenly across your shoulders. Press downwards on the suspension hook to load the harness.
4
Adjust the height of the suspension hook as described in the instructions for the standard harness. (Forestry clearing)
2
Grass clearing The machine should be supported in a harness when grass clearing so that the cutting equipment is parallel to the ground. 5 If you need to lower the suspension hook, for trimming for example, move the suspension strap (A) to the lower mounting point on the backplate. The elastic strap (B) can be tightened to transfer more load from the shoulder straps to the hip strap.
6
Triobalance harness
Safety release
Push down the red release lever to release the machine from the harness.
Correct balance
1 Forestry clearing The machine is balanced by moving the support ring on the machine forwards or backwards. On some models the support ring is �xed, however, this will then have a number of holes for the support hook. The machine is correctly balanced when it freely hangs horizontally from the support hook. In this way the risk of hitting stones is reduced if you need to release the handlebar.
Adjusting the harness
1 Tighten the hip strap so that it sits securely.
2
Tighten the chest strap under your left arm so that it �ts closely around your body.
2
Grass clearing Let the blade balance at a comfortable cutting height, i.e. close to the ground.
24 � English
|
|
|
> |
|
