Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 9 (click to view)
SAFETY INSTRUCTIONS
2 Throttle lock 4 Right hand guard
1
Make sure the throttle control is locked at the idle setting when you release the throttle lock.
Check that the right hand guard is not damaged and that there are no visible defects, such as cracks.
2
Press the throttle lock and make sure it returns to its original position when you release it.
5 Vibration damping system
Regularly check the vibration damping units for cracks or deformation 3 Check that the throttle control and throttle lock move freely and that the return springs work properly.
Make sure the vibration damping units are securely attached to the engine unit and handles.
4
Start the saw and apply full throttle. Release the throttle control and check that the chain stops and remains stationary. If the chain rotates when the throttle is on idle setting you should check the carburettor idle adjustment. See the section on �Maintenance�.
6 Stop switch
3 Chain catcher
Start the engine and make sure the engine stops when you move the stop switch to the stop setting.
Check that the CHAIN CATCHER is not damaged and is firmly attached to the body of the saw.