perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 18 (click to view)
>
A number display shows from 1~100 the percentage of memory storage progress from the TV to the Wireless Smart-Loader (100 = fully loaded). TV TO SMARTLOADER |||-------- ##
>
When the data transfer is completed, ## is �100�, the following menu appears for 3 seconds: SMARTLOADER READY >
>
Now the Wireless Smart-Loader is programmed and can be used to install other TV sets.
3. Installing a TV with the Wireless Smart-Loader Use a Wireless Smart-Loader programmed with the settings from a master TV of the same type. Be sure to use the same method of programming the Wireless Smart-Loader. It means that if you program the Wireless Smart-Loader using the wireless method, you have to use the same method to install the TV. Turn on the TV and point the Wireless Smart-Loader to the TV�s infra red receiver (distance around 30cm). ---- Press the �MENU� Key on the Wireless Smart-Loader. ° ° Highlight �SMARTLOADER TO TV� Press the right arrow key on the Wireless Smart-Loader for wireless method or on the TV Remote Control for wired method. > A number display shows from 1~100 the percentage of memory storage progress from the Wireless Smart-Loader to the TV (100 = fully loaded). SMARTLOADER TO TV |||-------- ## > When data transfer is completed, ## is �100�, the following menu appears for 3 seconds: TV READY > After that, the following menu comes up GOODBYE > > >
The TV goes to standby now and will start up automatically. Your TV is now installed and ready for use.