|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
VERY NICE FOR COURTESY AND PRECISION!.
tHE SITE IS VERY IMPORTANT FOR ALL DEVICES
vERY GOOD
;
+++ Is is fine, that was what i looking for. Thanks! +++
;
A very good complete archive, i am very satisfied for document.
 ;
The Service Manual received was helpful. The electronic information is exactly what I needed.
;
The Manual was perfect.
The deliverie was perfect.
Thanks
3 - SOUND - The items of the SOUND menu are not used 4 - MISCELLANEOUS - EFC031E
Factory setting Return Video Sound (Miscellaneous Field Service EFC031_X181-0 ... ... ... ... ... Factory Misc (Reset the values to ROM default LUMA_TEMPORAL-NR CHROMA_TEMPORAL-NR Calibration Debug Reset the Alignment values TT 27Y24 Packet Enable* Yes? ... ... Yes?
* According software version
4.1 Reset the values to ROM default - Reset all the EEPROM data to FF. Only required if the EEPROM data are corrupted. After �reset the values to ROM default� the alignment, calibration and channel installation is necessary. 4.2 LUMA_TEMPORAL_NR - Temporal noise reduction setting for luminance. Factory adjusted. It is not necessary to do adjustment on this item. 4.3 CHROMA_TEMPORAL_NR - Temporal noise reduction setting for chrominance. Factory adjusted. It is not necessary to do adjustment on this item. 4.4 Calibration See § 1.4 4.5 Debug - Bus quiet mode for main I2C Bus. Used only in development purpose. 4.6 Reset the Alignment values - Reset all alignment values to default value. Used only if the TV need new alignment. In that case it is necessary to start alignments by Video Calibration (ADC YPbPr). Note: After loading of a new software select � Reset the alignment values� and check the TV alignment. 4.7 TT 27Y24 Packet Enable According to software version. Factory adjust. Improve teletext performance for some special French channels
EFC031E - IFC130 First issue 02 / 06
9
|
|
|
> |
|
