|
Who's Online
There currently are 5345 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
As Always you can find here manuals even of difficult TV scheme which are scan in almost perfect way.clear and fast!!!!!
Great work thanks!
;
Incredibly clear!!!! Well done, complete and wonderful. It could not better than this!!!!
;
Thank You for fast delivery for the sheme.
Everything allright.
Thanks & best regards Franz
;
again you did a very good job. It was fast too. Photocopy are really readable and clear
;
Probably it never existed a 1081 official service manual from Commodore, it's look more like a NAPCEC service manual & diagrams compilation of the 1084 series and his variants, like the nap6523, 8cm505, 1084S, 1084P and obviously the 1081. It's more complete than other scans and the quality of the scans also are far superior. It has two circuit diagrams variants of the 1081, mono and stereo versions. It doesn't include a diagram for the Philips CM8500 or CM8501, they look like the 1081 but they are slightly different.
SX-68JF200
29A-SX1 29A-SX5 29A-SX8
SUB CONT SUB-BRIGHT ADJUSTMENT
NO. Adjustment part Adjusting procedure conditions Waveform and others 3 MAX BEEM 1 Receive E-5CH (Monoscope pattern) with
R1633 standard mode.
2 Make image normal with the remote con-
troller.
3 Connect the beam ammeter between TP1601
4 Adjust the beam current to 1.7mA ± 50µA with
and TP1602. Ammeter full scale 3mA range TP1602 is connected at side of the ammeter. TP1601 is connected at + side of the ammeter.
R1633 (sub-contrast VR). Note : Apply adjustment after aging with the beam current 1,500 ± 50µA or more for 30 minutes or more. (On the white or green monocolour screen)
4-1 SUB-CONTRAST Receive the window pattern with AV input. Note 1 : Use �Y� of Minolta colour
2
I C bus 2 Make image normal with the remote conanalyzer CA-100 in adjust-
(RF signal) troller. ment 4-1, 4-2, 5-1, 5-2.
3 Select the SUB-CONTRAST adjustment mode
with the remote controller, and adjust 50% white to 110 ± 3cd.
4-2 SUB-CONTRAST 1 Select the DVD mode. Note 2 : Window pattern of signal
I C bus adjust2 Receive of the DVD signal generagenerator is same ad JA-2 ment (DVD tor. (Component signal) 12CH. signal) (Window pattern) Note 3 : Use the signal generator
14
left) black of the window pattern to
CUTOFF POINT pattern.
3 Make image normal with the remote con"SX-1006" for SUB-CONT.,
troller. SUB-BRIGHT adjustment.
4 Select the SUB-CONTRAST adjustment mode
(DVD) with the remote controller, and adjust 50% white to 110 ± 3cd.
5-1 SUB-BRIGHT 1 Receive the window pattern with AV input. * When E-2CH (Crosshatch pattern) or
2
I C bus adjust2 Make image normal with the remote conequivalent signal is received.
ment (RF signal) troller.
3 Select sub-bright adjustment mode 1 Make image normal with the
controller, and adjust the right dark white remote controller. area of window pattern to 2.7cd ± 0.3cd. 2 Adjust 3rd (1 thru 5 from the
5-2 SUB-BRIGHT 1 Select the DVD mode. sink.
2
I C bus adjust2 Receive of the DVD signal genera-
ment (DVD tor. (Component signal) (Window pattern) signal) 3 Make image normal with the remote con-
troller.
4 Select the sub-bright adjustment mode (DVD),
and adjust right dark white area of the window pattern to 2.7cd ± 0.3cd of the window
14
|
|
|
> |
|