I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 16 (click to view)
Multiple-unit System Operation
9. Adjust the INPUT control on deck 2 of the master so the meter reading is around 0 dB. Balance the left and right input levels with the REC BAL control. 14. To continue to record, press the à button once more on deck 2 of the master.
10. Set the DOLBY NR switch on deck 2 of the master to the desired position.
15. To terminate recording, press STOP on deck 2 of the master.
All the slave decks conï¬gure themselves to the level and balance on deck 2 of the master. Settings on the individual decks are overridden. 11. To start recording, press the à button on deck 2 of the master.
If the tape on deck 2 of the master reaches the end of the forward side before any tapes on the slaves, recording continues on these tapes up to the end of their forward sides. You can interrupt recording on all the decks by pressing STOP on deck 2 of the master. 12. When all the tapes reach the end of their forward sides, hold down RECORD and press PAUSE on deck 2 of the master to put all the decks into Record Ready mode.
13. Press the à button on deck 2 of the master so that all the tapes are ready for recording on their reverse sides.
