|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
 ;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
;
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
SAFETY INSTRUCTIONS
If the chain lubrication is not working: � Check that the oil channel in the bar is not obstructed. Clean if necessary. Check the chain daily for:
Checking wear on cutting equipment
�
Check that the groove in the edge of the bar is clean. Clean if necessary.
� � �
Visible cracks in rivets and links. Whether the chain is stiff. Whether rivets and links are badly worn.
We recommend you compare the existing chain with a new chain to decide how badly the existing chain is worn. � Check that the bar tip sprocket turns freely and that the lubricating hole in the tip sprocket is not blocked. Clean and lubricate if necessary.
When the length of the cutting teeth has worn down to only 4 mm the chain must be replaced.
Chain drive sprocket
If the chain lubrication system is still not working after carrying out the above checks and associated measures you should contact your service agent.
The clutch drum is �tted with one of the following drive sprockets: A Spur sprocket (the chain sprocket is welded on the drum) B Rim sprocket (replaceable)
Lubricating the bar tip sprocket
Lubricate the bar tip sprocket each time you refuel. Use the special grease gun and a good quality bearing grease.
Regularly check the degree of wear on the drive sprocket. Replace if wear is excessive. Replace the drive sprocket whenever you replace the chain.
Bar Needle bearing lubrication
Check regularly: The clutch drum is �tted with one of the following drive sprockets: A Spur sprocket (the chain sprocket is welded on the drum) B Rim sprocket (replaceable) � Whether the groove in the bar has become badly worn. Replace the bar if necessary. � Whether there are burrs on the edges of the bar. Remove these with a �le if necessary.
Both versions have a needle bearing on the drive shaft, which has to be greased regularly (once a week). CAUTION! Use a high-quality bearing grease or engine oil.
English
� 13
|
|
|
> |
|
