|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great price, Quick delivery, the document was very usefull A+++++++++++++++
;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
 ;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
MAINTENANCE
Oiling the air �lter
Cleaning and lubrication
Always use HUSQVARNA �lter oil, art. no. 531 00 92-48. The �lter oil contains a solvent to make it spread evenly through the �lter. You should therefore avoid skin contact. Put the �lter in a plastic bag and pour the �lter oil over it. Knead the plastic bag to distribute the oil. Squeeze the excess oil out of the �lter inside the plastic bag and pour off the excess before �tting the �lter to the machine. Never use common engine oil. This would drain through the �lter quite quickly and collect in the bottom.
Clean any resin and plant residue from the blades using cleaning agent 531 00 75-13 (UL22) before and after using the machine. Lubricate the blade bars with special grease, part no. 531 00 75-12 (UL 21) before long periods of storage.
Gear housing
There is a grease nipple and a plug for �lling lubricant on the gear housing. Use a grease gun to �ll with grease. This should be done after every 60 working hours. Use Husqvarna�s special grease, no. 503 98 96-01.
CAUTION! The gear housing must not be �lled completely with grease. The grease expands as the machine heats up during operation. If the gear housing was completely �lled with grease it could damage the seals and lead to leakage of grease. The grease in the bevel gear does not normally need to be changed except if repairs are carried out.
English
� 19
|
|
|
> |
|
