PHILIPS 32PW6332/05
Owner's Manual

Installation
æ Installing

the TV set

Place your TV set on a solid, stable surface (please ensure this is strong enough). Do not place anything on the TV set which might damage it (plants or heat sources). For ventilation allow a space of at least 5cm around the TV set.

� Connecting

the aerial and the mains

Insert the aerial plug into the socket M at the rear of the set. Insert the mains plug into a wall socket (220-240 V/50 Hz).

ê

Surround loudspeakers
Connect the 2 Surround loudspeakers as illustrated opposite.The loudspeakers should be located at the rear or on either side of the listener (always connect 2 loudspeakers).The positive wire (the one with the black line) to the red loudspeaker connection, the negative wire to the black loudspeaker connection.

® Remote

control

Insert the 2 LR03-type batteries (supplied) making sure they are the right way around. In an effort to help protect the environment the batteries supplied with this television do not contain mercury or nickel cadmium. If a means of recycling batteries is available, please use this (if in doubt, contact your dealer).

� Switching

on

Press the on/off key to switch on the television. A green indicator comes on and the screen lights up. If the indicator is red, press the key on the remote control. When the remote control is being used the indicator flashes orange.

2