Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
Text excerpt from page 12 (click to view)
Störungen Die Waschmaschine Waschprogramms an: hält während während eines des
Mögliche Ursachen � � � � � � � � � � Die Wasser- bzw. Stromversorgung ist unterbrochen, Ein Spülstopp wurde programmiert. Deckel ist wegen hohem Wasserstand bzw. wegen hoher Temperatur verriegelt. Der Wasserhahn ist nicht geöffnet, Der Wasserzulauf ist unterbrochen. Das Flusensieb ist verstopft, Der Ablaufschlauch ist verstopft oder geknickt, Die Höhe des Ablaufschlauchs ist zu hoch (siehe "Installation"), Die Ablaufpumpe ist verstopft, Der Siphon der Installation ist verstopft. Der Deckel ist nicht richtig geschlossen. Die Klappen der Trommeltür sind geöffnet. Die vorgeschrieben Dosierung wurde nicht eingehalten, Die Siphons hinter der Waschmittelschublade sind verstopft (siehe Kapitel "Pflege und Wartung").
Der Deckel lässt sich Waschvorgangs nicht öffnen:
Es läuft kein Wasser zu. Die Anzeige ENDE blinkt 1x, gleichzeitig ertönt 1x ein Signalton**: Wäsche ist nicht gut geschleudert, in der Trommel ist noch Restwasser sichtbar. Die Anzeige ENDE blinkt 2x, gleichzeitig ertönt 2x ein Signalton**:
Die Anzeige ENDE blinkt 4x, gleichzeitig ertönt 4x ein Signalton**: Die Anzeige ENDE blinkt 10x, gleichzeitig ertönt 10x ein Signalton**. Weichspüler bzw. Bleichmittel treten aus der �ffnung zuviel Wäsche:
� � � �
* je nach Modell. ** Nachdem die möglichen Fehler behoben wurden, drücken Sie auf die Taste "Start/Pause", um das unterbrochene Programm fortzusetzen.
