|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Section 1
Getting Started
Meter Select Switch
386
This switch allows you to select display metering of either the digital or analog output signal. The analog level is scaled in dBu, while the digital level is scaled in dBFS.
LightPipe� Meter
This meter displays either the analog or digital output signal.
Digital Output
This knob controls the signal being sent to the A/D Converter, and ranges from -15 to +15dB.
1.3 Front Panel (Type IV� conversion system controls)
Dither Switch
This switch is used to select the dither type algorithms including: TPDF, SNR2 , or None. Dither is random noise that is added to the audio signal which effectively eliminates the harmonic distortion created by truncation. See the �Truncation� graph in section D.2 of the Appendix. The LED will be lit RED for the SNR2 or GREEN for the TPDF dither algorithm. When the LED is off, dithering is not in use.
Shape Switch
This switch selects either the Shape 1 or Shape 2 psycho-acoustic noise-shaping curve. Shape 1 utilizes a mild psycho-acoustic curve, while the curve used in Shape 2 tends to be more aggressive. Please see the "Noise Shaping" graph in section D.1 of the Appendix. The LED will light GREEN for Shape 1 and RED for Shape 2. When the LED is off, the noise-shaping effect is not in use.
Sample Rate Switch
This switch selects the digital output sample rate of either: 44.1, 48, 88.2, or 96 kHz. The LED will not be lit for 44.1 kHz, GREEN for 48 kHz, RED for 88.2 kHz and YELLOW for 96 kHz.
Word Length Switch
Selects output wordlength of 16, 20, or 24 bits output resolution. The LED will not be lit for 16 bit, GREEN for 20 bit, and RED for 24 bit.
Output Format
Selects the AES/EBU or S/PDIF digital output format. The LED will be lit red for AES/EBU and green for S/PDIF.
®
4
386 User Manual
|
|
|
> |
|
