|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
 ;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
 ;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
 ;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
 ;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
USING YOUR WASHER
STARTING YOUR WASHER
wWARNING wWARNING
Fire Hazard Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.
Electrical Shock Hazard Plug into an earthed outlet. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
1. Measure detergent and pour it into the washer.
3. Close the washer lid.
� If desired, add powder or liquid colour safe bleach.
2. Drop a sorted load of clothes loosely into your
washer, filling to the top row of holes. � Load evenly to maintain washer balance. Mix large and small items. � Items should move easily through the wash water. Overloading can cause poor cleaning. � To reduce wrinkling of permanent press clothes and some synthetic knits, use a large load size to provide more space (see step 4).
4. Turn the Load Size selector to the correct setting
for your wash load and the type of fabric being washed. � Choose a load size that allows the load to move freely for best fabric care. See the �Loading� section. � Change the setting after the washer has started filling by turning the selector to a different setting.
continued on next page 5
|
|
 |
> |
|