|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Zeer duidelijke afdrukken op A4-formaat , zeer uitgebreide handleiding . Pluspunt ,zeer snelle
respons van jullie , binnen de 24h . Top !!!
;
I AM HIGHLY IMPRESSED BY THE EASE OF USE OF THIS DOWNLOAD SERVICE. INSTRUCTIONS ARE CLEAR AND SIMPLE TO FOLLOW....EVEN BY TECHNOPHOBES SUCH AS MYSELF. THE EMAILS POINT YOU IN THE RIGHT DIRECTION...ITS SO EASY PEASY. THE DOWNLOAD CHOICE OF USER MANUALS IS EXTENSIVE AND I COULD NOT FIND A CHEAPER OR MORE EFFICIENT SERVICE ON THE INTERNET. I COULD NOT HAVE MADE A BETTER CHOICE OF INFORMATION PROVIDER. SHOULD I EVER NEED ANOTHER USER MANUAL, THEN THIS IS THE FIRST CHOICE SITE. COULD NOT BE BETTER PLEASED!!!!!!!...MANY THANXES FROM JIM BURNS
;
I was impressed with the quality of service (frequent e-mails to let you know the status of your order), and the speed at which the download became available. The manual was a life saver and was not easy to track down. Thank you for such an excellent service.
;
the manual was just what i wanted it had all the revelent information required to operate the hifi .Iwould use any manual i downloaded for any item which needs a manual
;
Die gewünschte Bedienungsanleitung wurde vereinbarungsgemäß in deutsch bereitgestellt. Sie ist gut lesbar. Kein Kauderwelsch.
Danke für den Service.
2577.1 en
29-09-2006
11:09
Pagina 55
Before Calling Service
Symptoms �Ghost� or double images No power Items to Check and Actions to follow � This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. � Verify if the TV�s AC power cord is plugged into the mains socket. � Unplug the television, wait for 60 seconds. Then re-insert plug into the mains socket and turn on the television again. � Verify antenna connections at the bottom of the TV to see if they are properly connected to the TV. � Possible broadcast station trouble.Try another channel. � Adjust the contrast and brightness settings.Try another auto picture setting. � Verify the Closed Captions control. Some TEXT modes could block the screen. � Verify if you selected the correct AV source. � Your TV has a protective mode in case there is too much heat build-up. Verify the clearance around the vents of the device to be certain there are no blocking walls or cabinets which would limit the air flow. When displaying a High Definition signal from the YPbPr inputs or HDMI input, if necessary, you can adjust the picture position to the center of the screen with the cursor left/right or up/down buttons on the remote control.This may be needed due to slight differences in output signals from different brands and types of HD sources boxes. Note: Most High Definition receiver boxes also have picture-positioning controls in their menu systems. If the TV cursor controls run out of range before the picture is correctly positioned, the receiver box controls will need to be adjusted. � Verify if the source complies with a supported PIN.
No picture
No picture and power switched on Picture position adjustment
No photo, music or video play or in poor quality only No sound
� Increase the VOLUME. � Verify if the TV is not muted, press the mute button on the remote control. � When no signal is detected, the TV automatically switches off the sound. This is proper operation and does not indicate a malfunction. � Adjust the contrast, color, tint and brightness setting. � Select Reset AV settings in the Installation menu. � Verify the antenna connection. � Verify whether the batteries are working. Replace if necessary. � Clean the remote control sensor lens on the monitor. � Operating range between TV and the remote control should not be > 240�. � You can still use the buttons at the right side of your TV. � Verify if the remote control is in the correct mode.
Good sound but poor color or no picture Snowish picture and noise Television not responding to remote control
55
English
|
|
|
> |
|
