PHILIPS 42PW9962
Owner's Manual

Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your receiver. The following connection diagrams show you how to connect it to the back or the front side of the receiver.

Video recorder
Note: Do not place your video recorder too close to the screen as some video recorders may be susceptible for signals out of the display.

CABLE

S-VIDEO
CVBS RGB AUDIO L/R

VIDEO

L

AUDIO
R
VHS/UHF

75
CABLE

3 A/V
IN

2 A/V
IN

1 A/V
IN

VIDEO
OUT

AUDIO
OUT

VTR

& Connect the antenna cable 1 to the antenna socket x of your video recorder. é Connect another cable 2 from the output j of your video recorder to the input x of your receiver. Better recording quality can be obtained if you also connect the Video, Audio Left and Right (only for stereo equipment) cables 3 to the VIDEO, AUDIO L and R inputs A/V IN 1 or A/V IN 2. The MONITOR OUT connectors can be used for daisy chaining or to record programs from your TV. See Record with your video recorder, p. 25. If you are using only mono equipment, connect only the VIDEO and the AUDIO L sockets. S-VIDEO quality with a S-VHS videorecorder is obtained by connecting the S-VIDEO cable with the S-VIDEO input. (See the instructions of your video recorder.)

18