|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
 ;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
Headphones
L
& é
Insert the plug into the headphone socket L at the right side of the TV. Press ¬ on the remote control to switch off the internal speakers of the TV. The headphone impedance must be between 8 and 4000 Ohms. The headphone socket has a 3.5 mm mini stereo jack. In the SOUND menu select Headphone volume to adjust the headphone volume.
VCR/Cable Converter Box
IR SHOOTER
AV 3
IN Pr Pb Y VIDEO L AUDIO R AUDIO S VIDEO
The Infrared - IR Blaster cables supplied enable you to make timed program recordings between the GUIDE Plus+ system and accessory VCRs/Cable Converter boxes. The IR Blasters work as small sized remote transmitters to turn on and select channels on the VCR and Cable convertor box in order to accomplish a timed VCR Plus+ recording. See GUIDE Plus+, p. 34.
& é
VCR
IR
Insert the connector end of the supplied Y-shape IR Shooter cable into the GUIDE Plus+ IR SHOOTER output jack on the rear of the TV (where you removed the Demo Pin). Position the control (transmitter) ends of the IR blaster under the front edge of the accessory VCR or Cable Converter. Two transmitting blasters are provided for those who have both a VCR and an accessory Cable Converter box. Be sure that the transmitting end of the IR blaster is facing up, ready to transmit into the front of the remote sensor window on the VCR or Cable Converter box. The IR Blaster should be positioned out as far from the front of the VCR or Cable Box as possible.
IR
CABLE BOX
Connect Peripheral Equipment
39
|
|
|
> |
|
