|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
So usefull to make my installation a breeze. 5 stars on quality.
;
very helpful, the information in these manuels are very detailed
;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
;
Good copy and great customer service! There was some confusion with my order and it was resolved promptly!
CIRCUIT MODIFICATION To modify the microphone circuit for normally shorted operation, proceed as follows: 1. Remove the three No. 6 Phillips screws from the back of the microphone case.
d B
Dimensions See Figure 3
14 mm (9/16 IN.) 8 mm (5/16 IN.) 45 mm (1-25/32 IN.)
2. Separate the front and back sections of the case, and remove the press-to-talk switch button. 3. Unsolder or clip the GREEN cable lead from the press-to-talk switch solder lug. 4. Solder the GREEN cable lead to the GREEN cartridge lead on the press-to-talk switch solder lug. 5. Replace the press-to-talk switch button in the front section of the case, then join the case halves together and install the No. 6 Phillips screws removed in Step 1 above. SPECIFICATIONS Type Dynamic, noise-canceling Frequency Response 100 to 5,000 Hz (see Figure 2)
+10 0
94 mm (3-11/16 IN.)
19 mm (3/4 IN.)
41 mm (1-19/32 IN.)
67 mm (2-5/8 IN.)
18 mm (23/32 IN.)
4.8 mm (3/16 IN.)
MICROPHONE MOUNTING HOLES, CLEARANCE FOR No. 8 SCREWS
9.1 mm (23/64 IN.)
�10 20 50 100 2 3 4 5 6 7 89 1000 2 3 4 5 6 789 10000 20000
46 mm (1-13/16 IN.) 36.5 mm (1-7/16 IN.)
Hz
10.3 mm (13/32 IN.)
TYPICAL FREQUENCY RESPONSE FIGURE 2 Impedance (at 1000 Hz) Rated at 150 Ω (175 Ω actual) for connection to microphone inputs rated at 19 to 300 Ω. Output Level (at 1,000 Hz, 5/16 in.) Open Circuit Voltage-66.0 dBV/Pa (0.5 mV) Hum Sensitivity Equivalent to 32 dB SPL in 1 millioersted field Operating Temperature Range -40° to 74° C (-40° to 165° F) Switch Type Double-pole, single-throw, leaf-type, push-to-talk Cable Non-detachable. 1.8 m (6 ft), neoprene-jacketed coil cord, four-conductor (two conductors shielded). Case Two-tone gray, high-impact ARMO-DUR®
0 dB = 1 volt per 1 Pascal/94 dB SPL
9.5 mm (3/8 IN.)
4.7 mm (3/16 IN.)
34.5 mm (1-23/64 IN.)
MOUNTING BRACKET
OVERALL DIMENSIONS FIGURE 3 Net Weight 330 grams (11.6 oz) CERTIFICATION Eligible to bear CE Marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments. SUPPLIED ACCESSORY Mounting Bracket (3 per kit) .......................................... RK6MB REPLACEMENT PARTS Cartridge ........................................................................... R98B Cable .................................................................................. C117 Switch............................................................................ RK338S SERVICE INFORMATION For additional service or parts information, please contact Shure's Service department at 1-800-516-2525. Outside the United States, please contact your authorized Shure Service Center.
2
SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A. Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446 Europe, Middle East, Africa: Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific: Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
|
|
|
> |
|
