TOSHIBA 57H93
Service Manual

Manually adding and deleting channels in the channel memory
After you have programmed the channels automatically, you can manually add or delete individual channels in the channel memory. To add or delete channels in the channel memory: To add a channel to the channel memory: Highlight the unchecked box next to the channel number you want to add, and then press ENTER to check the box. To remove a channel from the channel memory: Highlight the checked box next to the channel number you want to remove, and then press ENTER to uncheck the box. To save your new settings: Highlight SAVE and press ENTER. To revert to your original settings: Highlight CANCEL and press ENTER before saving. To remove all channels from the channel memory: Highlight CLEAR ALL and press ENTER, and then highlight SAVE and press ENTER. Note: This action cannot be cancelled unless you highlight CANCEL and press ENTER before saving your changes.

1 2 3
SPECIFIC INFORMATIONS GENERAL ADJUSTMENTS

Press MENU and open the SETUP menu. Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on screen, as shown in step 3). Open the TERRESTRIAL menu, highlight CHANNEL ADD/ DELETE, and then press ENTER. The illustration below shows channels programmed for the ANT 1 antenna input. To view the list of channels programmed for the ANT 2 antenna input, highlight CHANGE ANTENNA and press ENTER.

4

� 22 �