|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
;
Dear Sir,
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
Martie Verhoeven
The Netherlands.
 ;
The scan is clear and well readable with very few weaker spots, usually on black background with white letters, but with enough zoom those spots can be read.
Printout is clear, the manual is complete and has all pages scanned.
I would give 5 stars, except that it is not in color, and the schematic and PCB pages are scanned on multiple pages. The document is locked (except printing) so the pages can not be extracted to compose them together for printing on the large plotter
It is worth the price tag.
1.
Turn off the TV and unplug the power cord.
5.
Grasp the lamp unit handle and gently pull the lamp unit straight out of the TV. Set the old lamp unit aside.
2.
STOP! Allow the lamp to cool for at least one (1) hour before replacing it.
Note: Wear solt, lint-free gloveswhen replacing the lamp unit.
6. 3. On the lamp unit door on the side of the TV, loosen the screw using a manual screw driver, and then remove the lamp unit door.
TV back
Carefully insert the new lamp unit straight into the TV until it is fully seated.
Lamp unit door detail
loosen screw using manual screwdriver
Note : Never subject the lamp unit to excessive shock. Never touch the lamp unit glass or otherwise get it dirty. Doing so may affect the image quality and reduce the service life of the lamp. See �Cleaning the lamp unit glass� below. 7. Using a manual screwdriver, tighten two lamp unit screws. Note:Hand-tighten only. Do not use an electric screwdriver.
4.
Using a manual screwdriver, loosen the two screws on the lamp unit.
Lamp unit screws (use manual screwdriver only)
Lamp unit screws
- 11 -
|
|
|
> |
|
