|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very pleased with the quality of the scan. No complaints whatsoever.
 ;
I liked the product. I would use their sevices again.
;
I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
;
The quality of the manual is top. The transfer worked perfect and fast.
No problems at all. Recommendable
TEST MODE
< How to Enter the Test Mode >
While pressing the PROGRAM key, insert the AC power cord to AC wall outlet. Pressing the [E] key decreases the track number to -1. Pressing the [F] key increases the track number to +1. Pressing OPEN/CLOSE key opens or closes the tray. The machine enters the [Sled mode].
< When the Machine Has Entered the Test Mode >
The system is initialized and the main power is turned on. During the test mode, the main power of the CD block is turned on always. The test mode starts with the [Sled mode].
< How to Exit the Test Mode >
Remove the AC power cord from power outlet, or turn off the system power. The focus bias, tracking balance and the tracking gain adjustment values can be displayed, modified, set and released in the Play mode only of the following Test mode. When the PRGM button is pressed during Play, the adjustment value of the focus bias is displayed. After that, you can enter the followings: � FOCUS - BIAS [Display]: Pressing the RANDOM key during disc play, the focus bias setting value is displayed. [Adjustment]: Every pressing of the � key decrements the adjustment value by 1 step. Every pressing of the � key increments the adjustment value by 1 step. [Set]: The adjustment value is set by pressing the PLAY key after adjustment. Playback a disc after setting. [Release]: The set value can be released by pressing the STOP key. � TRACKING - BALANCE [Display]: Pressing the REPEAT key during disc play, the tracking balance setting value is displayed. [Adjustment]: The same procedure as in the FOCUS BIAS. [Set]: The same procedure as in the FOCUS - BIAS. [Release]: The same procedure as in the FOCUS - BIAS. � TRACKING - GAIN [Display]: Pressing the DISPLAY key during disc play, the tracking balance setting value is displayed. [Adjustment]: The same procedure as in the FOCUS BIAS. [Set]: The same procedure as in the FOCUS - BIAS. [Release]: The same procedure as in the FOCUS - BIAS.
< Types of Test Mode >
[Sled mode]
All displays of the FL tubes light. The optical pickup can be moved by pressing [E] or [F] key. Pressing the [9] key establishes the [Focus mode]. Pressing the [2] key establishes the [Play mode]. Pressing the [E] key moves the sled to outer circumference. Pressing the [F] key moves the sled to inner circumference. Pressing OPEN/CLOSE key opens or closes the tray.
[Focus mode]
Lighting of all displays of the FL tubes are turned off and returns to normal display. The focus search is performed in the focus mode regardless whether disc is inserted or not, or focus OK or NG. (Numbers of times of focus search is unlimited. Auto sequence is not used.) Focus servo is not locked in even the focus is obtained. Pressing the [2] key establishes the [Play mode]. Pressing the [E] key decreases the track number to -1. Pressing the [F] key increases the track number to +1. Pressing OPEN/CLOSE key opens or closes the tray. The machine enters the [Sled mode].
[Play mode]
Lighting of all displays of the FL tubes are turned off and returns to normal display. The focus search (numbers of search is unlimited) is performed. When focus comes to in-focus, the focus servo is locked in and the machines enters the normal play mode. During [Play mode], GFS and sound skipping are not monitored. When focus becomes out-of-focus, another attempt is made to search for focus. The tracking servo and the sled servo can be turned on and off by pressing the [2] key. Pressing the [9] key establishes the [Sled mode]. The [ || ] display can be turned on and off by pressing the [2] key . While the [ || ] display is turned off: CLV-A Tracking servo: on Sled servo: on While the [ || ] display is turned on: CLV-A Tracking servo: off Sled servo: off
Display method
8 8 8-8 8: 8 8
� FOCUS - BIAS
F 8-8 8
� TRACKING - BALANCE
8 L-8 8
� TRACKING - GAIN
G A-8 8
52
|
|
|
> |
|
