|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
CD TEST MODE
< How to Enter the Test Mode >
Note: Target models of this test mode. CX-ZR550 CX-ZVR55 While pressing the CD key, insert the AC power cord to AC wall outlet.
[Play mode]
Lighting of all displays of the FL tubes are turned off and returns to normal display. The focus search (numbers of search is unlimited) is performed. When focus comes to in-focus, the focus servo is locked in and the machines enters the normal play mode. During [Play mode], GFS and sound skipping are not monitored. When focus becomes out-of-focus, another attempt is made to search for focus. The tracking servo and the sled servo can be turned on and off by pressing the [ ] key. Pressing the [ ] key establishes the [Sled mode]. The [ ] display can be turned on and off by pressing the [ ] key . While the [ ] display is turned off: CLV-A Tracking servo: on Sled servo: on While the [ ] display is turned on: CLV-A Tracking servo: off Sled servo: off Pressing the [ ] key decreases the track number to -1. Pressing the [ ] key increases the track number to +1. Pressing OPEN/CLOSE key opens or closes the tray. The machine enters the [Sled mode].
< When the Machine Has Entered the Test Mode >
The system is initialized and the main power is turned on. During the test mode, the main power of the CD block is turned on always. The test mode starts with the [Sled mode].
< Types of Test Mode >
[Sled mode]
All displays of the FL tubes light. The optical pickup can be moved by pressing [ ] or [ ] key. Pressing the[ ] key establishes the [Focus mode]. Pressing the [ ] key establishes the [Play mode]. Pressing the [ ] key moves the sled to outer circumference. Pressing the [ ] key moves the sled to inner circumference. Pressing OPEN/CLOSE key opens or closes the tray.
< How to Exit the Test Mode >
Remove the AC power cord from power outlet, or turn off the system power.
[Focus mode]
Lighting of all displays of the FL tubes are turned off and returns to normal display. The focus search is performed in the focus mode regardless whether disc is inserted or not, or focus OK or NG. (Numbers of times of focus search is unlimited. Auto sequence is not used.) Focus servo is not locked in even the focus is obtained. Pressing the [ ] key establishes the [Play mode]. Pressing the [ ] key decreases the track number to -1. Pressing the [ ] key increases the track number to +1. Pressing OPEN/CLOSE key opens or closes the tray. The machine enters the [Sled mode].
22
|
|
|
> |
|
