|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Dear Sirs,
Thank you for the fast support, the manual does provide all necessary information to repair the radio. All schematics are in a good quality for reading.
The manual fits 100% to my requirements as a technican.
Kind regards Thomas
;
the big video recorder format s-vhs many features delicate in loading system of the cassette. Such machines are no longer manufactured, it would be too expensive.
 ;
THIS MANUAL IS VERY GOOD AND VERY CLEAR
PLEASE NOTE IT DOES NOT CONTAIN THE SETUP INFORMATION TO ALIGHN THE GEARS IN THE CD MECH IT DOES SHOW ALL THE PARTS AND THEIR LOCATIONS .
;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
;
High quality scan of original Service Manual. Everything´s fine!
70GF-63E
1� HORIZONTAL SHIFT
a) Internal pattern signal will be displayed. b) When volume-up button is pressed, picture moves to the left. c) When volume-down button is pressed, picture moves to the right. d) Adjust the horizontal location to obtain picture centering (fig. 2). Fig. 2
2� E-W WIDTH
a) Internal pattern signal will be displayed. b) When volume-up button is pressed, horizontal scanning increases. c) When volume-down button is pressed, horizontal scanning decreases. d) Adjust the horizontal amplitude to obtain 9% overscan (fig. 3). Fig. 3
3� PIN PHASE
a) Internal pattern signal will be displayed. b) When volume-up button is pressed, slide pincushion changes. c) When volume-down button is pressed, slide pincushion changes. d) Adjust the PIN PHASE to obtain condition as in (fig. 4).
4� PIN AMPLITUDE
Fig. 4
a) Internal pattern signal will be displayed. b) When volume-up button is pressed, slide pincushion changes from pincushion to barrel shape. c) When volume-down button is pressed, slide pincushion changes from pincushion to barrel shape. d) Adjust the PIN AMPLITUDE to obtain condition as in (fig. 5). a) Internal pattern signal will be displayed. b) When volume-up button is pressed, slide pincushion changes from pincushion to barrel shape. c) When volume-down button is pressed, slide pincushion changes from pincushion to barrel shape. d) Adjust the CORNER AMPLITUD to obtain condition as in (fig. 6).
Fig. 5
5� CORNER AMPLITUD
Fig. 6
6� CORNER SYMMETRY
a) Internal pattern signal will be displayed. b) When volume-up button is pressed, slide pincushion changes from pincushion to barrel shape. c) When volume-down button is pressed, slide pincushion changes from pincushion to barrel shape. d) Adjust the CORNER SYMMETRY to obtain condition as in (fig. 7). a) Internal pattern signal will be displayed. b) When volume-up button is pressed, upper picture scanning decreases and lower picture scanning increase. c) When volume-down button is pressed, upper picture scanning increases and lower picture scanning decrease. d) Adjust the vertical symmetry to obtain symmetry scanning between upper and lower picture (fig. 8). a) Internal pattern signal will be displayed. b) When volume-up button is pressed, vertical size of picture increases. c) When volume-down button is pressed, vertical size of picture decreases. d) Adjust the vertical size to obtain overscan (fig. 9).
Fig. 7
7� VERTICAL LINEARITY
Fig. 8
8� VERTICAL AMPLITUDE
Fig. 9
6
|
|
|
> |
|
