|
Who's Online
There currently are 6031 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
70GS-65S
The following geometry adjustments can be carried out. Detailed instructions on how to execute these are given on the following pages Horizontal � Horizontal Shift � E-W Width � Pin Phase � Pin Amp � Upper Corner Amplitude � Lower Corner Symmetry Vertical � Vertical Amplitude � S Correction � Vertical Shift � Vertical Linearity � Vertical angle � Vertical bow
Just in case the TV set requires a full geometries adjustment, please proceed first with Vertical according to the above order, and after that, adjust Horizontal according to the above order. Horizontal Shift Adjust the horizontal shift so that the picture is centred. The effect of this adjustment is shown in figure 2. � When the volume up button is pressed, the picture moves to the left. � When the volume down button is pressed, the picture moves to the right. � Press the stand-by button on the remote control to store. E-W Width Adjust the E-W Width so that 9% over-scan is achieved. The effect of this adjustment is shown in figure 3. � When the volume up button is pressed, horizontal scanning increases. � When the volume down button is pressed, horizontal scanning decreases. � Press the stand-by button on the remote control to store. Pin Phase Adjust the Pin Phase so that the picture is symmetrical top and bottom. The effect of this adjustment is shown in figure 4. � When the volume up button is pressed, side pincushion changes. � When the volume down button is pressed, side pincushion changes. � Press the stand-by button on the remote control to store.
Fig.2
Fig.3
Fig.4
Pin Amp Adjust the Pin Amplitude so that the picture is centred. The effect of this adjustment is shown in figure 5. � When the volume up button is pressed, side pincushion changes from pincushion to barrel shape. � When the volume down button is pressed, side pincushion changes from pincushion to barrel shape. � Press the stand-by button on the remote control to store. Upper Corner Correction Adjust the Upper Corner Correction so that the picture is centred. The effect of this adjustment is shown in figure 6. � When the volume up button is pressed, side pincushion changes from pincushion to barrel shape. � When the volume down button is pressed, side pincushion changes from pincushion to barrel shape. � Press the stand-by button on the remote control to store.
Fig.5
www.rtv-horvat-dj.hr
6
Fig.6
|
|
|
> |
|