|
There are currently no product reviews.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
 ;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
;
downloaded next day , manual is very helpful , fast and easy
;
This Service Manual was exactly what I needed to repair my Philips TV. The purchase was convenient and I received the manual at the same day I paid for it.
D
3.0 Com Port setzen
Um die Verbindung zwischen Interface und PC herzustellen müssen Sie nun Ihren PC auf die richtige Eingangsbuchse stellen (Com Port). Bitte starten Sie den Comserver mit einem Doppelklick der Maus auf das Icon "ComServ".
GB
3.0 Setting the Com port
To provide a connection between the interface and the PC, you must now set the correct communication port.
1.
1.
2.
2.
Double-click the "ComServ" icon to start the ComServer.
3.
In der oberen Menuebake des ComServers müssen Sie den Punkt "Konfiguration" + "Schnittstellen" auswählen.
3.
Choose the item "Schnittstellen" (interface) from the "Konfiguration" menu.
4.
Stellen Sie nun die von Ihnen gewünschte Schnittstelle (V24 Port) ein und bestätigen mit "OK". Danach speichern Sie die Einstellungen.
4.
Then set the desired interfaces (V24 port) and confirm with "OK". Click "OK" to store your settings.
-6-
|
