|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
;
Very good scanning quality. All schematics are very legible. Worth every cent !
;
Excellent quality, very quick download turnaround, will definately use again.
D
3.0 Com Port setzen
Um die Verbindung zwischen Interface und PC herzustellen müssen Sie nun Ihren PC auf die richtige Eingangsbuchse stellen (Com Port). Bitte starten Sie den Comserver mit einem Doppelklick der Maus auf das Icon "ComServ".
GB
3.0 Setting the Com port
To provide a connection between the interface and the PC, you must now set the correct communication port.
1.
1.
2.
2.
Double-click the "ComServ" icon to start the ComServer.
3.
In der oberen Menuebake des ComServers müssen Sie den Punkt "Konfiguration" + "Schnittstellen" auswählen.
3.
Choose the item "Schnittstellen" (interface) from the "Konfiguration" menu.
4.
Stellen Sie nun die von Ihnen gewünschte Schnittstelle (V24 Port) ein und bestätigen mit "OK". Danach speichern Sie die Einstellungen.
4.
Then set the desired interfaces (V24 port) and confirm with "OK". Click "OK" to store your settings.
-6-
|
|
|
> |
|
