This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Text excerpt from page 6 (click to view)
ELECTRONIC CLOCK
OVEN "ON" LIGHT,,,_ TRIANGULAR _ _ SET EITHER DIRECTION TURN KNOB IN
_AN,
(if equipped)
CLOCK
To set ¢1o¢k: Press and hold TIMER and BAKE TIME buttons then turn SET knob in either direction to set time-ofday.
SELF CLEAN OVEN
See page 11for additional information. TO SET CLEAN CYCLE: 1. Close doorand move doorlock lever to the right until it rests in the lock po-
BAKE TIME --;
rIMER--/ /
?t°°
r"
2. Turn thermostat and selector knobs to CLEAN. 3. Press SELF CLEAN button. 3:00 will appear in the display. When the SELF CLEAN button is pressed, the oven will automatically clean for 3 hours. A shorter (2 hours) or long (up to 4 hours) clean cycle can be selected by turning the SET knob after pressing the SELF CLEAN button.
When power is first supplied to the oven or if there is a power failure the display will blink 88:88. Follow the instructions above to set the' clock. TIMER To set timer: Press TIMER button. Turn SET knob to set desired time. Display wilt immediately begin counting down in seconds. Timer can be set for up to 99 minutes. I '2:DDI OOQ
TIMER -_
SKENTB clean cycle,press TIMER button to return display to time-of-day. _,_ To prevent accidently changing the
Whentime lapses, the alarmwill sound and the current time-of-day will reappear in the display. Press TIMER button to stop alarm.