This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Text excerpt from page 7 (click to view)
MAINTENANCE AND CLEANING
Before cleaning or carrying out maintenance, press the ON/OFF push button and close the water tap. 1. Clean the appliance exterior with a neutral detergent. Do not use abrasive detergents. 2. Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues. If the spray nozzles become clogged with food residues, clean the spray arms as follows: Upper spray arm: � Detach the spray arm by pushing it up 1 and turning it counter-clockwise 2 then pull it down 3. � Rinse the nozzles under running water. � Remount the spray arm by aligning it with the rotary mounting and insert it. Make sure the spray arm rotates freely. Lower spray arm: � Pull the spray arm up (see drawing). � Rinse the nozzles under running water. � Remount the spray arm by aligning it with the rotor pin and insert it. � Remount the spray arm and pull it down. Make sure the spray arm rotates freely. Cleaning the filters: 1. Rotate the central filter H by turning it counter-clockwise and extract it by pulling it up. 2. Pull out the cylindrical filter L and extract it from the microfilter M separate the plactic filters by gently pushing on both pieces and pull (see drawing). 3. Having removed the central filter you have also the possibility to take out the G filter (it is sufficient to lift it out). 4. Clean all the components. While Reassembling please note that the filters must be correctly assembled to ensure good washing results.