|
There are currently no product reviews.
 ;
Straightforward ordering process. Service manual scan was clear & easy to read. Very comprehensive instructions for alignment. Excellent, thank you.
 ;
Fast, clear and useful. Important for me: the manual is in German.
;
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
8889 N/B Maintenance
2.2.9 LCD Panel
Disassembly 1. Remove the battery, keyboard, CPU, hard disk drive, CD/DVD-ROM drive, wireless card, DDR and LCD assembly. (Refer to section 2.2.1, 2.2.2, 2.2.3, 2.2.4, 2.2.5, 2.2.6, 2.2.7 and 2.2.8 Disassembly) 2. Remove the two rubber pads and two screws on the corners of the panel. (Figure 2-21) 3. Insert a flat screwdriver to the lower part of the LCD cover and gently pry the frame out. Repeat the process until the cover is completely separated from the housing. 4. Remove the six screws and disconnect the cable. (Figure 2-22)
Figure 2-21 Remove LCD cover
Figure 2-22 Remove the six screws and disconnect the cable
62
|
