|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
To replace
the covers:
1. Replace metal cover support on wall supports in front section of cabinet. 2. Fit back corners of cover frame into notched supports on liner walls, then lower front of cover frame into place. 3. Slide back of glass insert into place, then lower front.
Adjusting
the crisper
humidity
control
You can control the amount of humidity in the moisture-sealed crisper. 9 The control can be adjusted to any setting between LOW and HIGH. l LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins. l HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
Adjusting
the meat
drawer
temperature
Cold air flows against the meat drawer through an opening between the freezer and the refrigerator. This helps keep the meat drawer colder than the rest of the refrigerator for better storage of meats. Slide the control to let more or less cold air through.
Use control to adjust meat drawer temperature.
Removing
To remove the snack
the snack
bin:
bin
1. Slide snack bin straight out to the stop with an even, constant motion. 2. Lift the front. 3. Slide bin out the rest of the way. 4. Replace in reverse order.
Pull out to the stop, lift the front and pull again.
10
|
|
|
> |
|
