|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
 ;
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
;
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
82569_GB.fm Page 80 Wednesday, March 21, 2001 5:18 PM
GAS HOB
GAS BURNERS
The flow of gas to the burners is adjusted by the knobs which control the safety-closing taps. Match the mark on the knob with the symbols printed on the panel: - full disc = tap closed
- symbol
= max. opening or max. flow
- symbol
= min. opening or min. flow
To light one of the burners: 1. Press and turn the corresponding knob to the maximum flow position (large flame) and keep the knob pressed until the gas is lit. If there is a power cut use a flame. 2. Set the gas tap to the position required. If particular characteristics of the locally supplied gas make lighting the burner with the knob in the maximum flow position difficult, repeat the operation with the knob in the minimum flow position. The maximum flow is used to bring liquids to the boil quickly, while the low flow is used to heat food slowly or for simmering. All the operating positions must be chosen between the maximum and the minimum and never between the maximum and the OFF.
80
Black process 45,0° 133,0 LPI
|
|
|
> |
|
