|
Who's Online
There currently are 781 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
 ;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
 ;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
 ;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
 ;
Very pleased with the quality of the scan. No complaints whatsoever.
Professional Audio System Components
2.1.9
Limiter Voltage Processor
1.914.519
Together with this voltage processor, the VCAs 1.914.518/528 can perform as signal level limiters.
The processorâs threshold can be set within a wide range of levels, so that limiting action becomes effective at a desired level within a range of â15 to +15 dBu. Limiting action attacks within 1 ms, whereas release can vary from 50 ms to 5 s, depending on the programâs energy content. This means that no audible âpumpingâ action â which is often associated with such a device â will occur. After the cessation of loud passages, amplification will recover only slowly. For stereo applications, a two-channel setup (VCAs and voltage processor) can be linked, so that identical amounts of gain reduction will take place simultaneously in both channels.
The input of the voltage processor has to be wired to the output of the VCA. The processorâs output, when connected to the VCAâs control terminal, will effect the necessary gain reduction so that a limiting characteristic is obtained. The limiting threshold is adjustable in a wide range. Remote on/off switching of the limiter function is possible.
Date printed: 29.11.01
E17
|
|
 |
> |
|