|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Awesome manual. Complete diagrams of all board assemblies as well as how to get to each part of the t.v. down to the individual screws and their locations. Get it.
;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
EXTERNAL DEGAUSS
Make sure you disable the Bottom-right, Top-right, Top-left, Bottom-left, and rrc settings before performing the external degauss. Follow the procedure below depending on the adjustment mode you are in.
PROCEDURE o USER MODE
1) Select Degauss and press the MENU Button so that the Bottom-right, Top-right, Top-left and Bottomleft will be disabled. 2) Degauss the entire screen with degausser while the Degauss is activated (approx. 6 seconds).
n FACTORY MODE
1) Select CRT Check and press the MENU Button so that the Bottom-right, Top-right, Top-left, Bottom-left, and rrc will be disabled. 2) Confirm that the OSD stays displayed on the screen. Note: If the OSD disappears, restart from 1). 3) Degauss the entire screen with degausser.
-3-
|
|
|
> |
|
