|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
;
I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Beiblatt für Antennenverstärker AB 2
Der Antennenverstärker AB 2 ist ein hochwertiger selektiver Verstärker. Er dient zur Verbesserung der Funksignalstärke bei Einsatz von mehreren Empfängern der Sennheiser evolution wireless Serie an ein Antennenpaar über den passiven Antennensplitter ASP 2. Die Stromversorgung der Verstärker erfolgt über den ASP 2 aus dem Netzteil NT 1, welches auch die Empfänger mit Strom versorgt. Durch die Selektivität werden Funksignale innerhalb des Durchlassbereichs verstärkt sowie Funksignale mit anderen Frequenzen wirksam unterdrückt. Zur Funktionskontrolle besitzt der Verstärker eine rote LED. Es können auch zwei AB 2 innerhalb einer Antennenleitung angeschlossen werden, um eventuelle Pegelverluste bei Verwendung von langen Antennenleitungen zu kompensieren. Dazu wird ein AB 2 direkt an der Antenne (z. B. A 1031-U) und ein AB 2 am Antennensplitter ASP 2 angeschlossen. Die Versorgungsspannung wird vom ersten AB 2 auf den zweiten weitergeleitet (DC-coupled). Wichtig: Beachten Sie beim Anschlie�en des AB 2 unbedingt die Richtung (siehe Typenschild)!
Technische Daten
Stromversorgung 10�18 V DC/50 mA (DC-coupled) Fernspeisung über Antennenkabel vom Splitter ASP 2 aus Netzteil NT 1 > 36 MHz AB 2-A AB 2-B AB 2-C AB 2-D AB 2-E > 10 dB 50 Ohm BNC-Buchsen ca. 95 x 47 x 21 mm ca. 60 g Antennenverstärker AB 2 BNC-Kabel 518 - 554 MHz 626 - 662 MHz 740 - 776 MHz 786 - 822 MHz 830 - 866 MHz
Schaltbandbreite Frequenzbereiche
Verstärkung Impedanz Anschlussstecker Abmessungen Gewicht Lieferumfang
AB 2 antenna booster
The AB 2 is a high-quality frequency-selective antenna booster for increasing the RF signal strength when operating several Sennheiser evolution wireless series receivers with a single pair of antennas via the ASP 2 passive antenna splitter. The antenna boosters are powered via the NT 1 power supply unit of the ASP 2. This NT 1 also powers the receivers. Due to the selectivity of the AB 2, all RF signals within the frequency window are amplified while RF signals on other frequencies are attenuated. Proper function of the antenna booster is indicated by a red LED. In order to compensate for possible signal losses due to long antenna cables, up to two AB 2 can be connected in the antenna cable line: one AB 2 is directly connected to the antenna (e.g. A 1031-U), the second AB 2 is connected to the ASP 2 antenna splitter. The supply voltage is distributed from the first AB 2 to the second (DC-coupled). Important: When connecting the AB 2, it is imperative to observe the direction of signal flow (see type plate)!
Specifications
Power supply 10-18 V DC/50 mA (DC-coupled) powered (via antenna cable) by the NT 1 mains unit of the ASP 2 antenna splitter > 36 MHz AB 2-A AB 2-B AB 2-C AB 2-D AB 2-E > 10 dB 50 ohms BNC sockets 95 x 47 x 21 mm 3 3/ � x 1 7/ � x 13/ �
4 8 16
Tuned bandwidth Frequency range
518 - 554 MHz 626 - 662 MHz 740 - 776 MHz 786 - 822 MHz 830 - 866 MHz
Gain Impedance Connections Dimensions Weight Delivery includes
approx. 60 g (2 oz) AB 2 antenna booster, BNC cable
Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany www.sennheiser.com
Printed in Germany Publ. 02/04 93957/A02
|
|
|
> |
|
