|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Cleaning Air Conditioner Your
Proper use and care of your air conditioner will help ensure longer life of the unit and lower operating costs. Follow these instructions carefully. Call your Whirlpool servicing dealer for an annual checkup.
l
l
Electrical Shock and Fire Hazard Unplug power cord from receptacle before cleaning unit. Failure to do so could result in electrical shock or personal injury. Do not use flammable fluids, solvents, abrasive cleaners or strong detergents. Fire or product damage could result.
Cleaningthe front panel
1. Unplug power cord. 2. Remove the front panel from unit for cleaning. Press down at top edge of the front panel as shown. 3. When the front panel moves away from top of cabinet, pull top of panel toward you. 4. Lift up and away from bottom spring clips. 5. Remove filter and clean separately. (See �Cleaning the filter� below.) 6. Clean front panel with warm water and mild soap or detergent. Use a soft cloth. Rinse and dry thoroughly. 7. Wipe control panel clean with a soft, dry cloth. 8. Replace front panel. 9. Plug in power cord.
Cleaning the filter
The filter is cleanable. A clean filter helps remove dust, lint and other particles from the air. Check every two weeks to see if filter needs cleaning. 1. Unplug power cord. 2. Remove front panel from unit. (See �Cleaning the front panel� above.) 3. Remove elastic band holding filter in place. Remove filter. 4. Clean filter using a vacuum cleaner. OR 5. If very dirty, wash filter with warm water and mild detergent. Air dry thoroughly before replacing. 6. Replace filter, elastic band and front panel. 7. Plug in power cord.
|
|
|
> |
|
