|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
3. Place one end of tray center over carriage bolt.
Attach support legs
1. Determine the correct slots on the tray side from the type of exterior construction of the building. Thin wall construction (vinyl, wood, etc.)
1
1. 1st and 2nd slots
Thick wall construction (brick) 1
4. Then place flat washer, lock washer and hex nut. NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed. 1 2 3 4
5
1. Hex nut 2. Lock washer 3. Flat washer 1. 2nd and 3rd slots 4. Tray center 5. Carriage bolt
5. Insert second carriage bolt through tray side and attach other end of support leg. NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.
2. Insert carriage bolt up through slot on tray-frame side and support leg.
1 2 3
4
1. Hex nut 2. Lock washer
3. Flat washer 4. Carriage bolt
6. Install support leg on other side.
6
|
