|
There are currently no product reviews.
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
9. Adjust the leveling bolt until support angle is level. Tighten the leveling bolt locknut. This allows air conditioner to tilt back slightly for proper condensate disposal. NOTE: Be sure the window track is securely attached to the building construction. Use longer screws into the subframing if necessary. Do not drill a hole in the bottom pan. The air conditioner is designed to operate with approximately W� of water in the bottom pan.
Top retainer (Step 17) Foam seal Filler panel (Step 17)
10. Cut two pieces of adhesive back foam seal equal to the height of the
window opening. Remove backing and apply to the vertical inside edges of the window frame and sliding sash that will rest against the air conditioner. 11. Replace the sliding sash in the window frame.
Foam seal
Channel
9
|
