|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
 ;
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
;
Fast service, document is OK. Thanks! Searched for it long time.
;
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
;
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Cleaning
the front
panel
0
1. Unplug the power cord. 2. Remove two screws from bottom edge of front panel. Remove the front panel from unit when cleaning. 3. Lii the front panel up and toward you. 4. Remove slide-out air filter and clean separately. (See �Cleaning the slide-out air filter� below.) NOTE: Front panel does not have to be removed to clean fitter. 5. Clean front panel with warm water, mild soap or detergent and a soft cloth. 6. 7. 8. 9. Rinse front panel and dry thoroughly. Wipe control panel clean with a soft, dry cloth. Replace front panel and screws. Plug in the power cord.
c
0
I
Screw
Screw
Cleaning
the slide-out
air filter
The air filter is cleanable. A clean air fitter helps remove dust, lint and other particles from the air. Check the air filter every two weeks to see if it needs cleaning. 1. Remove air fifter by sliding it up and out the top of the front panel. 2. Clean filter using a vacuum cleaner. OR If fiker is very dirty, wash it with warm water and mild detergent. Air dry fiker thoroughly before replacing. 3. Replace air fiker by sliding it back down into the opening at top of the front panel.
14
|
|
|
> |
|
