WHIRLPOOL AD60LBK0
Owner's Manual

6

Operating dehumidifier

AUTO DRY CONTINUOUS HIGH MOIST

DRY

indicates the bucket is full OR the bucket is not in position
EMPTY /ADJUST BUCKET

Control C
ON / OFF

LOW

MODE

selects mode

adjusts humidity removal set point (amount of moisture removed from room)

If your control looks like C: TO TURN DEHUMIDIFIER ON:
Press the ON/OFF button. All lights will flash once. If the Empty/Adjust Bucket light comes on, the dehumidifier will not operate. Empty or adjust bucket. Each time you unplug the dehumidifier or power is interrupted, the control will return to your previous settings.

Pressing or will not increase or decrease the amount of moisture removed. If you have selected AUTO DRY: Press or to set the amount of moisture you want removed. The dehumidifier will automatically adjust fan speed and/or turn on and off to maintain your setting.

MODE SELECTION
Press MODE button to select fan speed. Choose LOW, HIGH, CONTINUOUS or AUTO DRY. If you have selected LOW or HIGH: Press or to set the amount of moisture you want removed. Pressing increases the amount of moisture removed; pressing decreases the amount of moisture removed.The indicator light will change according to the number of times you press or . If you have selected CONTINUOUS: You cannot change the amount of moisture you want removed.

TO TURN DEHUMIDIFIER OFF:
Press the ON/OFF button.The dehumidifier will retain your last settings.

EMPTY/ADJUST BUCKET light:
If this light is on, the dehumidifier is not running. This light indicates that you need to check: � If the bucket is full, empty bucket and replace. � If the bucket is not in position, remove bucket and replace. Make sure the bucket fits all the way into the dehumidifier and the light is off, or dehumidifier will not run.