perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 51 (click to view)
SETTING ORIGINALS
C Select [DF Setting] with the <>
keys, then press the [Select] key.
1
B4 A3
CP19AEE
ND2C0109
1: Set into the document feeder (ADF).
Important � If the originals are of different vertical sizes, put the longer original on the bottom; otherwise the original size might not be detected correctly.
2
D Select [Mixed Sizes] with the <>
keys, then press the [Select] key.
G Adjust
ND2C0109
the guide to the widest original size. into the document feeder.
H Set the aligned originals face up
Thin paper mode
Note � Set to Thin Paper mode when you place thin paper into the document feeder; otherwise your originals may be damaged.
Note � To deselect [Mixed Sizes], press the [Select] key again.
E Press the [Exit] key.
A Press the {Menu} key.
ND2C0103
Enhanced Image Menu Menu Meny 1 2
F Align the rear and left edges of
the originals as shown in the illustration.