|
There are currently no product reviews.
 ;
Found website easy to use and manual very clear. First class service
 ;
The quality is quite good and clear. Nothing of the informations inside is lost during the digitalizing process
;
Very good service, fast downloads and good manuals.
;
Good qulity. Even as it is an old manual (from 1991-1992) it has a good scanned quality and is complete, including user's manual, disassembly intructions, diagrams and schematics, ajustments, troubleshooting and parts list, as usual with SONY manuals and Owner-manuals service.
;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
COPIER (A172/A199)
10 May 1996
[F]
[C]
[A] [B] [B]
A172I530.img A172I531.img
41. Remove the black toner supply receptacle [A] (1 screw). NOTE: Refer to the toner tank lid for the color of the development unit. 42. Remove the developer supply funnel [B] from the bracket [C] and clean the inner surface. 43. Set the developer supply funnel on the black development section as shown. 44. Touch the key [D], to enter the output mode. 45. Enter "68" with the number keys, then touch the key [D] again to select test mode #68 "black development drive motor ON". 46. Touch the Start key [E]. 47. Shake a pack of black developer [F] 20 times then pour it in. 48. 1 minute after pouring the developer, touch the stop key [G]. NOTE: Do not touch the stop key within 1 minute, otherwise, the developer will not be distributed evenly in the development unit.
[G]
[D] [E] 49. Remove the developer supply funnel, then install the toner supply receptacle.
3-18
|
