The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
Text excerpt from page 214 (click to view)
ADF/SCANNER SECTIONS
November 29, 1999
[C] [A]
[D] [B] [E]
H306R061.WMF
[F]
[G]
H306R062.WMF
3. Release the pawls of the second mirror cover [A] and SBU cover [B] and remove the covers. 4. Remove the xenon lamp cover [C] (4 screws). 5. Remove the clip [D] and slide out the lamp [E]. NOTE: The transparent part of the xenon lamp [F] must face to the scan line. To keep up the slack in the Xenon lamp harness [G], lead the harness to the left of the pawl under the connector and behind the pawl under the screw. This can prevent the harness from being caught between the optical unit and the ADF lower unit.