|
There are currently no product reviews.
 ;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
;
downloaded next day , manual is very helpful , fast and easy
 ;
This Service Manual was exactly what I needed to repair my Philips TV. The purchase was convenient and I received the manual at the same day I paid for it.
;
Very pleased with the whole process. Great commication and very easy instructions to order and to download the manual.
INC
JAA78071-R.3583.A
�� In the case of smaller amplitude, for adjustment, loosen �� the two screws #541 and then shift the MR head position �� as shown in the right figure. �Note�During adjustment, prevent the magnetic tape and MR �head from touching the magnetized driver bit, or the magnetic �data may be damaged. � �Reference� �� In case the amplitude of either CH1 or CH2 seems smaller, one of the two screws #541 may be loosened. �� Then, check the screws. In case the screws are fully tightened, the MR head may be troubled. Then, be sure to �� replace the MR head unit B15 and adjust it again.
CH1=20mV AC 10:1 CH2=20mV AC 10:1 5ms/div NORM 200KS/s
MR head
� 541 � 2 Magnetic tape
�� In case of a presence of partial drop in the amplitude between the infinity and the near distance, the magnetic data �� in magnetic tape may be damaged. Then, replace the magnetic tape and adjust it again.
CH1=20mV AC 10:1
CH2=20mV AC 10:1
5ms/div NORM 200KS/s
�� Turn off the rated voltage power supply and remove the SWM unit. Ｐ
- L20 ï½¥ AF-S 24-85/3.5-4.5G -
|
