|
There are currently no product reviews.
 ;
The purchased manual is an high-quality scan of the original JVC paper-based Service Manual. The Service Manual includes the Owner´s Manual, so you do not have to buy both of them.
 ;
It paid to find this Service Manual, couldn't find it anywhere else. Exactly what I wanted. Received within 24 hours.
;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
Disassembly Procedures for AJ-BS900HP/EN
1. Removal of the Front Panel
1. Unscrew the 4 screws (A), and remove the Front Panel.
4. Removal of the BS Front C.B.A.
1. 2. Loosen the 3 worm screws (A), and pull out the Knob. Pull out of the Set Up Knob.
SET UP KNOB
(A)
(A)
(A)
(A)
2. Removal of the C.B.A. Fixed Angle
1. Unscrew the screw (B), and remove the C.B.A. Fixed Angle.
3. 4.
Unscrew the 4 screws (C), and remove the connector (P1). Unscrew the 4 screws (D), and remove the BS Front C.B.A..
(D) (B) (C) (P1) (C)
(D)
3. Removal of the Card Edge C.B.A.
1. Pull the Card puller, and pull out the C.B.A. a little way. 2. Disconnect the connector (J1), and the pull out the C.B.A.
5. Removal of the Top Panel
1. Unscrew the 4 screws (E). 2. Unscrew the 4 screws (F), and remove the Top Panel.
(F)
Card Puller
(J1) (F)
(E)
DIS-3
|
