|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
 ;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
;
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Inspections prior to shooting
Inspecting the viewfinder
1 Adjust the position of the viewfinder. 2 Check that the color bar signals are displayed on
the viewfinder screen, and adjust the BRIGHT, CONTRAST and PEAKING controls in such a way that the color bar signals appear clearly on the viewfinder.
8 Set both the AUDIO IN CH1 and CH2 switches to
FRONT, and set LEVEL METER on the VTR VF INDICATOR screen of VTR MENU to CH1. Check when sound is input from the microphone connected to the MIC IN jack on the lens that the audio level is displayed on the viewfinder screen. Check when LEVEL METER on the VTR VF INDICATOR screen of VTR MENU is set to OFF that the audio level display is cleared from the viewfinder screen.
3 Check that the MENU screen is shown on the
viewfinder screen and that the item settings can be changed by operating the MENU button or JOG dial button. (Refer to pages 70 to 72 for the menu operations.)
9 Check when the ZEBRA switch is set to ON that
the zebra pattern appears on the viewfinder screen, and check when it is set to OFF that it is cleared from the screen. <Note> Depending on the setting statuses, the items and functions in steps 3 to 6 may not be displayed or they may not operate. In a case like this, switch the unit to the engineer mode, set DISPLAY MODE on the menu�s VF DISPLAY screen to �3,� and set the necessary items on the SHUTTER SPEED, !LED and CAM USER MENU SELECT 1, 2 and 3 screens.
4 Set the OUTPUT/AUTO KNEE switch to CAM, and
select the settings for the CC and ND FILTER controls. Check that the figures for the FILTER displays on the viewfinder screen change to reflect the changes in the control positions.
5 Take the following steps, and check that the
lamp lights when the items set to ON on the !LED screen of CAM MENU have been operated. 1. Use the GAIN switch to set the gain to any value except 0 dB. 2. Set the SHUTTER switch to ON. 3. Set the WHITE BAL switch to PRST. 4. Engage the lens extender. 5. Set the FILTER controls to any setting except B.
6 Repeatedly press the SHUTTER switch from ON to
SEL, and check that the shutter setting changes on the viewfinder screen.
7 Point the lens at any object, and turn the focus ring
to bring the object into focus. Check that an image of the object appears on the viewfinder.
110
|
|
|
> |
|
