|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Came in the mail within a few hours. Gave clear instruktion on maintaines. Is of great use to have this manual in house
 ;
Easy to access. Clear instructions. No problems. Printed fine.
;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
Setup menus (continued)
USER menu <BASIC>
No./Item 009 Description No./Item 012 SYS FORMAT 0000 50M : DVCPRO50 (50 Mbps) is selected. 0001 25M : DVCPRO (25 Mbps) is selected. Note: The format complies with the setting of this menu item when the tape is ejected. 013 PB FORMAT 0000 MANUAL : The format complies with the setting of setup menu No. 012 (SYS FORMAT) when a DVCPRO cassette is inserted. The format complies to the format recorded on the tape when a DV or DVCAM cassette is inserted. 0001 AUTO : The format complies with the format recorded on the tape. Note: When AUTO has been selected, the picture and sound may be disturbed until the format is detected after a tape is loaded. 017 CHARA SIZE This selects the size of the characters for the superimposed display output from the VIDEO MON connector. 0000 NORMAL : Standard size 0001 LARGE : 4 times larger than the standard size Note: When LARGE has been selected, only time data is displayed, regardless of the setup menu No.008 (DISPLAY SEL) setting. This sets the format in which the tape is to be played back. Description This sets the VTR�s recording and playback format. This sets the position of the characters on the horizontal plane for the time CHARA H-POS code and other super displays output to the VIDEO MON connector. 0000 : 0004 : 0016 Note: 0 : 4 : 16
Press the joystick, then you can set the position of the characters by inclining it up or down or to the left or right. 010 This sets the position of the characters on the vertical plane for the time code CHARA V-POS and other super displays output to the VIDEO MON connector.
(For AJ-SD93P) (For AJ-SD93E)
0000 : 0018 : 0022
0 : 18 : 22
0000 : 0023 : 0028
0
: 23 : 28
Notes: � Press the joystick, then you can set the position of the characters by inclining it up or down or to the left or right. � When the DISPLAY SEL status causes characters to extend beyond the edges of the screen, the setting value is changed but the characters are automatically displayed at a position on the screen where they will not extend. 011 CHARA TYPE This selects the display type for the super display output to the VIDEO MON connector as well as for displays such as the setting menu, etc. 0000 WHITE : White characters against a black background. 0001 W/OUT : White characters with a black border.
The underlined items indicates the initial setting.
� 22 �
|
|
|
> |
|
