|
There are currently no product reviews.
 ;
Great manual, great price. Has a few of the basic operating instructions that most service manuals leave out. Complete instructions for disassembling board by board, safety precautions, schematics, complete parts list.
;
I am very pleased with the service manual for my RT-909. This was an easy purchase and great procuct, and much cheaper than other venues i had looked at. This web site is now listed in my favorites list. KEEP UP THE GOOD WORK. THANKS. J. BROWN
;
A very well written and easy to understand manual.
;
There was no problem at all.After paying i had to wait only a few hours,than i could
download the manual in best pdf-quality.
Thank You !
 ;
I found this service manual to be complete in every detail except for troubleshooting charts. It would be helpful if it had a set of troubleshooting charts; however it is a very good manual otherwise and for the price it is very well worth it.
Disassembly Procedures for AJ-BS900HP/EN
1. Removal of the Front Panel
1. Unscrew the 4 screws (A), and remove the Front Panel.
4. Removal of the BS Front C.B.A.
1. 2. Loosen the 3 worm screws (A), and pull out the Knob. Pull out of the Set Up Knob.
SET UP KNOB
(A)
(A)
(A)
(A)
2. Removal of the C.B.A. Fixed Angle
1. Unscrew the screw (B), and remove the C.B.A. Fixed Angle.
3. 4.
Unscrew the 4 screws (C), and remove the connector (P1). Unscrew the 4 screws (D), and remove the BS Front C.B.A..
(D) (B) (C) (P1) (C)
(D)
3. Removal of the Card Edge C.B.A.
1. Pull the Card puller, and pull out the C.B.A. a little way. 2. Disconnect the connector (J1), and the pull out the C.B.A.
5. Removal of the Top Panel
1. Unscrew the 4 screws (E). 2. Unscrew the 4 screws (F), and remove the Top Panel.
(F)
Card Puller
(J1) (F)
(E)
DIS-3
|
