|
There are currently no product reviews.
 ;
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
;
Manual was complete and available promptly, since I had lost my original manual. Very good response.
;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
31055020aGB.fm Page 25 Monday, July 31, 2006 6:41 PM
3. Lift the bottom of the inside sheet of glass and remove it (fig. 6)
6
4. Slip out the second and the third sheet of glass, paying particular attention to the position of the word SAFEGLASS (Fig. 7)
7
5. Refit the sheets of glass in reverse order making sure that: - The word SAFEGLASS on the intermediate sheets is facing upwards so as to be correctly legible (fig. 8); - if one of the intermediate sheets does not have the word SAFEGLASS it must be inserted in the position closest to the internal glass. Put the inside glass into position with the word SAFEGLASS facing the top of the door. (fig. 6) Reposition and screw on the two glass supports A (fig. 4 and fig. 5) Note: a slight play between the inside glass and the door uprights is to be considered normal as it compensates expansion of the glass caused by heat. To remount the door: 6. Insert the hinges into their grooves and lower the door fully (fig. 3) 7. Lower the two catches again (fig. 2) 8. Close the oven door fully.
8
9
25
|
