|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very fast service, best quality of the service manual and the schematics
 ;
This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
;
Hi, this is a very clear manual, nice copy, not quite up to the standard of the very best available but better than many others. I think the price was especially fair for a hard to find manual and I would certainly use this manual seller again. Recommended.
;
This schema available for me in good condition. I would highly recommend.
;
Thanks for this "hard to find" service manual.
I apreciate the good quality of scanning and the pages scanned in A3 format.
4. Adjustment procedure
(1) PIT disc (TEST DISC: TGYS1) Insert a disc and press the �PLAY� key. (Be careful of the direction of the unit.) After �AUTO ADJ H� appears on the LCD of the remote control, �COMPLETE� appears. (2) GRV disc (SONY MDW-74) Insert a disc and press the �PLAY� key. (Be careful of the direction of the unit.) After �AUTO ADJ L� appears on the LCD of the remote control, �COMPLETE� appears. * If �Failed� appears during adjustment, it means that the adjustment was suspended due to an error.
5. Others
(1) Initializing the EEPROM While �IDLE� is displayed, press the DISP/SEARCH key to initialize the EEPROM. After initialization, �EP INIT OK� appears on the LCD. * After initialization, perform the adjustment again, otherwise �NO ADJUST!� will appear during normal use.
TR NO.
EP I NT
OK
(2) Sled operation check While �IDLE� is displayed, move the pickup to the outer circumference by pressing the F-SKIP, then move the pickup to the inner circumference by pressing the B-SKIP.
22
|
|
|
> |
|
