SHARP ARFX9
Owner's Manual

OPTIONAL TRANSMISSION SETTINGS
There are several transmission settings that you can make before dialing and transmitting an original.

ORIGINAL SIZE
The original size can be set to "A4", "8.5x11" or "8.5x14". The setting is only effective for one transmission. If desired, you can set a fixed original size that remains in effect for all transmissions.

1

Press the [MENU] key.

5

Press the [OK] key.

1,2,3, 1,2,3,

1,2,3, 1,2,3,

2

Press the [ ] key ( ) or [ ] key ( ) until "4:USER PROGRAM" appears, and then press the [OK] key.

6

Press the [CLEAR ALL] key (

)

Selection

Press the [CLEAR ALL] key ( ) to exit.

4

"4:USER PROGRAM"

3

Press the [ ] key ( ) or [ ] key ( ) until "1:DOC. GLASS SIZE" appears, and then press the [OK] key.

Selection

"1:DOC. GLASS SIZE"
To set a fixed original size for all transmissions: Press the [ ] key ( ) or [ ] key ( ) to select "2:FIXED DOC. SIZE".

Note

To temporarily change the original size setting when faxing from the document glass, use the "1: DOC. GLASS SIZE" setting. To change the permanent original size setting, use the "2: FIXED DOC. SIZE" setting.

4

Press the [ ] key ( ) or [ to select the original size.

] key (

)

1,2,3, 1,2,3,

The selections are as follows: 1:A4 2:8.5x11 3:8.5x14

53