|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
 ;
High quality scan of original Service Manual. Everything´s fine!
;
Good scan of the original service manual. All schematics and adjustment procedures are there. It helped me to fix a long lasting problem with the tracking circuitry. The manual also includes the supplementals 1,2 and 3. Included are; electrical schematic's , pcb layout's, mechanical drawing's and exploded views, disassembly manual and maintenance procedures. 236 pages.
;
The Service Manual received was helpful. The electronic information is exactly what I needed.
I recomend all of my friends about this technical page.
;
High quality scan of service manual. I am satisfied!
2. AR-P14 installing procedure
<Before installation> * * This installation procedure is provided for use with the AR-M350U/ M450U series. To connect this machine to a network, a Print Server Card (NIC) ARNC5J must be installed to the multi-function controller board in advance.
<3>Remove the control PWB unit. Remove the five screws that fix the control PWB unit to the main unit of the printer. Then, hold the two grips and pull out the control PWB unit to remove it from the main unit.
*
To enable the printer expansion function, the product key must be acquired. <4>Mount the printer expansion kit ROMs(2 pcs.)to the control PWB. Remove the ROMs(main and boot ROMs)from the control PWB and replace them with the two ROMs(main and boot ROMs)of the printer expansion kit. The main and boot ROMs are indicated with "MAIN" and "BOOT" on the labels on the ROMs respectively. When mounting the printer expansion kit ROMs, insert them to the same positions in the same direction as those before replacement and ensure that the inserted printer expansion kit ROMs are locked with the fittings of the sockets.
The application number, machine serial number, and product key number are important information. Keep the above information for future reference. 1) Mount the printer expantion kit ROMs to the control PWB. <1>Turn off the main switch of the main unit of the printer Turn the main switch located on the front side of the main unit to the "OFF" position. If the machine is equipped with a facsimile unit, also turn off the FAX power switch. Then remove the power plug from the outlet. .
<2>Remove the cables connected to the control PWB unit. Remove all the cables connected to the control PWB unit of the main unit of the printer.
<5>Re-attach the control PWB. Attach the control PWB to the main unit of the printer and fix it using five screws.
AR-M350U UNPACKING AND INSTALLATION 6-2
|
|
|
> |
|
